PSW-M2
| Quantity | Unit price |
|---|---|
| To 9 |
€52.84
|
| To 19 |
€45.42
|
| To 34 |
€43.78
|
| To 49 |
€40.07
|
| From 50 |
€36.46
|
Available, delivery time: heavily dependent on the destination
Product information "PSW-M2"
For air, compressed air, pneumatics, refrigerants based on fluorinated hydrocarbons, non-corrosive fluids, water
Various setting ranges available:
From stock:
Generally with G 1/4"
-0.5 ~ 2 bar (0.2 ~ 0.7 bar hysteresis)
-0.5 ~ 3 bar (0.35 ~ 1.5 bar hysteresis)
-0.2 ~ 7.5 bar (0.7 ~ 4 bar hysteresis)
1 ~ 10 bar (1 ~ 3 bar hysteresis)
2 ~ 14 bar (1 ~ 4 bar hysteresis)
for more see data sheet
Supplied with cover cap for the adjusting screws.
This pressure switch is designed for use under difficult conditions and is particularly suitable for work in the field due to the visibility of the settings.
The switch is typically used to control coolant pumps or air conditioning systems.
Thanks to the adjustable hysteresis, pumps can be controlled effectively without additional electronics.
The medium connection is made of brass as standard. Stainless steel is available on request (and as a special order). This naturally increases the already wide range of applications even further due to the higher compatibility.
These pressure switches are comparable to the following pressure switches:
Danfoss KP 060-216666
Danfoss KP 060-121766
Danfoss KP 060-113366
Danfoss KP 060-113766
Danfoss KP 060-215966
All brands, trademarks and registered trademarks are the property of their respective owners
| Features: | adjustable hysteresis, adjustable switching point |
|---|---|
| einstellbar: | ja |
Accessory Items
For air, water, engine and hydraulic oils, paraffin, other hydrocarbonsSwitching points adjustable between 0.5 bar and 6 bar (with various models)Available versions from stock: PSW-M2D2 (0,5 - 2 bar, max pressure 16,5 bar) PSW-M2D4H (0,5 - 3,5 bar, max pressure 33 bar) PSW-M2D6H (1 - 6 bar, max pressure 33 bar)Electrical version: single pole, double throw (SPDT)This differential pressure switch is designed to monitor the differential pressure in oils. The pressure applied between the two measuring points is not only monitored by the set switching point. The optical scale also provides a direct view of the set switching point. The higher pressure is applied to the lower connection. This pressure switch is used, for example, for simple monitoring of valve functions, oil filters and oil pumps, as well as system components in compressed air systems, but also has a high electrical capacity to switch consumers directly.
For air, compressed air, pneumatics, refrigerants based on fluorinated hydrocarbons, non-corrosive fluids, waterLeft-hand pressure switch for low range: - 0.2 ~ 7.5 bar and 0.7 ~ 4 bar hysteresis adjustableRight pressure switch for high pressure: 8 ~ 32 bar 4 bar hysteresis fixedThree variants available, which differ in whether the switches reset automatically or must be reset manually when the pressure exceeds or falls below the set pressure:AA: both pressure switches reset automaticallyAM: the left pressure switch (for low pressure) resets automatically, the right one (for high pressure) must be reset manuallyMM: both pressure switches must be reset manuallySupplied with cover cap for the adjusting screws.This pressure switch is designed for use in difficult conditions and is particularly suitable for working in the field due to the visibility of the settings.The switch is typically used to control coolant pumps or air conditioning systems.Thanks to the adjustable hysteresis, pumps can be controlled effectively without additional electronics.The left-hand pressure switch is typically intended for idle protection of a pump, the right-hand pressure switch to prevent an overload.Depending on the implementation, there are three different variants to switch off the system in the event of a fault until it is checked or to restart it automatically.The medium connection is made of brass as standard. Stainless steel is available on request (and as a special order). This naturally increases the already wide range of applications even further due to the higher compatibility.These pressure switches are comparable to the following pressure switches:Danfoss KP 15 060-124166Penn P78PLMAlco PS2All brands, trademarks and registered trademarks are the property of their respective owners
For air, compressed air, pneumatics, refrigerants based on fluorinated hydrocarbons, non-corrosive fluids, waterSetting range:-1 ~ 0 bar (0.3 bar hysteresis)For further details see data sheetSupplied with cover cap for the adjusting screws.This pressure switch is intended for use under difficult conditions and is particularly suitable for work in the field due to the visibility of the settings.The switch is typically used for monitoring vacuum pumps and prevents operation if the suction pressure is too high.Thanks to the adjustable hysteresis, pumps can be controlled effectively without additional electronics.The medium connection is made of brass as standard. Stainless steel is available on request (and as a special order). This naturally increases the already wide range of applications even further due to the higher compatibility.